Nasiol NeoCoatX | High-Volume Dealership-Grade Nano Ceramic Coating (100mL)

Nasiol NeoCoatX | High-Volume Dealership-Grade Nano Ceramic Coating (100mL)

Maximum shop throughput. Forgiving 3-minute flash time. Coat up to 5 vehicles per bottle.

For automotive dealerships, high-volume detailing centers, and enthusiasts stepping into ceramic protection, speed and forgiveness are everything. Nasiol NeoCoatX is a high-yield, dealership-grade nano-ceramic coating engineered to blend elite surface defense with traditional, user-friendly application methods.

Featuring an exceptionally generous 2 to 3-minute flash time, NeoCoatX completely eliminates the stress of rapid high-spotting, allowing entry-level technicians and beginners to coat panels flawlessly. Despite its ease of application, it delivers a rugged chemical-resistant barrier that shields paint from harsh UV rays, road salt, industrial fallout, and acidic bird droppings—leaving behind a slick, super-hydrophobic gloss that lasts for 6 to 12 months.

Why Dealerships & Volume Shops Choose NeoCoatX

• Elite Fleet Yield Economy: The massive 100mL bottle format treats up to 5 standard vehicles, drastically lowering chemical cost-per-car and driving maximum aftermarket profitability for finance and detailing departments.

• Extended 3-Minute Flashing Window: A highly forgiving chemical structure that allows up to 3 minutes before leveling is required, minimizing errors, streak marks, and labor-intensive re-polishing.

• Aggressive Chemical Resistance: Forms a hard-scale barrier that withstands severe environmental weathering, commercial car washes, and harsh winter de-icing salts.

• Deep Color-Enriching Shine: Instantly increases clear coat depth and color saturation, creating a stunning showroom floor presentation that commands a premium.

• Layerable Efficiency: Achieves robust standalone protection in a single pass, while allowing a secondary layer to be stacked after just 1 hour for added depth and reassurance.

Application Surfaces & Material Guide

NeoCoatX features broad exterior cross-compatibility but must be kept off porous or un-cured surfaces:

Step-by-Step Production Application Protocol

To secure high-speed installation without sacrificing coating adhesion, utilize this streamlined workflow:

Phase 1: Surface Decontamination & Prep

1. Wash & Clean: Thoroughly wash and decontaminate the exterior panels to remove loose dirt and environmental grit.

2. Panel Wipe: Wipe down all targeted sections using Nasiol Clean to instantly strip away any pre-existing transit waxes, silicone residues, or polishing oils. Ensure the substrate is 100% dry.

Phase 2: High-Volume Installation

1. Dial In the Climate: Work indoors completely out of direct sunlight on a cool surface. Work in manageable 2ft by 2ft grids per session.

2. Setup the Media: Wrap a fresh suede cloth tightly over a foam applicator block. Shake the NeoCoatX bottle gently.

3. Controlled Dosing: Pour an efficient 2–3mL of product onto the suede cloth. Always secure the bottle cap immediately between panel grids.

4. Criss-Cross Application: Spread the coating evenly across the paintwork using overlapping horizontal and vertical lines.

5. The Forgiving Flash: Allow the coating to flash for 2 to 3 minutes under normal ambient conditions until light beading pattern highlights manifest.

6. Level & Buff: Wipe away excess residue using a premium Nasiol Microfiber Cloth in straight, linear passes. Fold the towel into quarters frequently. Immediately follow up with a second clean microfiber towel, performing light circular buffing passes to lock in a streak-free reflection.

7. Optional Layering: If a deeper gloss profile is desired, a secondary layer can be applied after waiting exactly 1 hour from the initial pass.

Phase 3: Post-Coating Cure

• First 24 Hours: Keep the vehicle completely isolated from direct sunlight, standing water, rain, heavy dust, and contamination.

• First 48 Hours: Allow the nano-polymers to fully crosslink before exposing the vehicle to any aggressive detergent-based washing systems.

Complete Box Content Inventory

• 1x Nasiol NeoCoatX Ceramic Coating (100mL High-Yield Bottle)

• Note: Media kits (applicators and towels) are sold separately or can be supplemented with shop stock.

Product Specifications

• Volume: 100mL

• Vehicle Yield Capacity: Up to 5 Cars per bottle

• Durability Range: 6 – 12 Months

• Flash Time Window: 2 – 3 Minutes

• Layer Interval: 1 Hour (Optional secondary layer)