Nasiol Glass Shield Wipe-On | Ultra-Hydrophobic Ceramic Glass Coating Towelette Kit

Nasiol Glass Shield Wipe-On | Ultra-Hydrophobic Ceramic Glass Coating Towelette Kit

High-speed water sheeting. Crystal-clear foul-weather visibility. Zero-stress wipe application.

Driving through heavy downpours, blinding snowstorms, and freezing rain requires optimal windshield clarity. Nasiol GlasShield Wipe-On is a professional-grade, ultra-hydrophobic ceramic glass coating packed into a convenient, ultra-fast towelette application system. Engineered exclusively for automotive exterior glass, GlasShield forms a chemically bound nano-barrier that forces standing water to break into tight beads and blow completely off the glass at highway speeds.

Unlike standard short-lived rain repellents, Glass Shield’s advanced formulation is built to endure the friction of daily driving, delivering up to 1 year or 40,000 windshield wiper sweeps of continuous protection. By creating an ultra-slick surface, it keeps road film, bird droppings, and insect guts from bonding, while drastically delaying winter icing for effortless morning defrosting.

Why Detailers & Drivers Choose GlasShield Wipe-On

• 40,000 Wiper Sweep Durability: High-density chemical bonding allows the coating to actively resist wiper blade abrasion and aggressive windshield washer fluids for up to a full year.

• Surgical High-Speed Water Repellency: Rain, sleet, and snow sheet off the glass rapidly at speeds as low as 30–35 mph, reducing your reliance on wiper blades and improving foul-weather reaction time.

• All-Season Environmental Defense: Actively repels industrial fallout and summer bugs while making winter ice and frost incredibly easy to scrape off the glass.

• Zero-Mess Towelette Delivery: Pre-saturated wipes remove the guesswork out of product consumption, providing the exact amount of liquid needed to treat a standard vehicle without waste.

• Optically Clear Finish: Dries completely transparent without causing wiper chatter, skipping, or distracting night-driving glare.

Application Surfaces & Material Guide

Glass Shield Wipe-On is strictly formulated for dense, silica-based exterior glass structures:

Step-by-Step Precision Installation Protocol

To avoid hazing and guarantee a perfectly clear, long-lasting bond, follow this two-stage wipe workflow practiced daily in our Lake Forest facility:

Phase 1: Deep Glass Preparation (Package No. 1)

1. Dial In the Climate: Work indoors or in a fully shaded area completely out of direct sunlight on a cool surface. For optimal bonding, ensure temperatures are above 50°F (10°C) in a dry, dust-free environment.

2. Wash & Inspect: Meticulously wash and dry the exterior glass. Inspect the surface from multiple angles to ensure zero hard water spots or tree sap spots remain.

3. The Panel Wipe Pass: Open Package No. 1 (Nasiol Clean Wipe). Beginning at a top corner of the glass, wipe the entire surface using overlapping horizontal and vertical lines to strip away residual oils and microscopic road grime. Allow the glass to air dry completely.

Phase 2: Coating Deployment (Package No. 2)

1. Setup: Put on the included nitrile gloves and check that the glass is 100% dry.

2. Rapid Application: Open Package No. 2 (GlasShield Wipe-On Towelette). Immediately begin wiping down one-half of the windshield at a time, utilizing rapid side-to-side, then up-and-down motions to spread the chemistry as evenly as possible. Work efficiently, as the towelette will begin to dry as the product transfers to the silica.

3. The Clear Buff: As you finish a section, immediately buff the glass using a clean, dry microfiber towel until all traces of the wiping haze completely disappear, revealing a streak-free, crystal-clear surface.

4. Accidental Overspray: If you accidentally swipe onto paint, rubber seals, or plastic trim, wipe it away immediately with a microfiber towel before it cures.

Phase 3: Post-Coating Cure

• Allow the coated glass to crosslink undisturbed in a dry, dust-free place out of direct sunlight for 24 hours to unlock maximum durability. Do not run the wiper blades or apply washer fluid during this initial cure window.

Complete Box Content Inventory

This compact, ready-to-store kit contains the complete multi-stage treatment:

• 1x Nasiol Clean Prep Wipe (Package No. 1)

• 2x Nasiol GlasShield Wipe-On Ceramic Towelettes (Package No. 2)

• 1x Pair of Nitrile Protective Gloves

• 1x Nasiol Authenticity Sticker

Product Specifications

• Product Form: Pre-Saturated Liquid Nano-Towelette System

• Durability Rating: Up to 1 Year / 40,000 Windshield Wiper Sweeps

• Core Benefit: Ultra-Hydrophobic Rain, Snow, and Frost Repellency

• Application Window: Exterior Automotive Glass Only