Nasiol Glass Shield | Professional Ultra-Hydrophobic Ceramic Glass Coating (50mL)

Nasiol Glass Shield | Professional Ultra-Hydrophobic Ceramic Glass Coating (50mL)

Elite foul-weather visibility. Maximum friction resistance. Up to 2 years of continuous sheeting.

Driving through blinding rainstorms, heavy snow, and freezing sleet requires uncompromising windshield clarity. Nasiol Glass Shield 50mL is a professional-grade, liquid nano-ceramic glass coating engineered to establish a permanent chemical bond with silica surfaces. By creating a hyper-slick, ultra-hydrophobic microscopic field, it forces standing water to instantly collapse into tight beads and blow completely off the glass at low highway speeds.

Unlike standard, short-lived retail rain repellents that wash away after a few storms, the liquid Glass Shield formula is engineered for industrial endurance. It delivers an incredible up to 2 years or 80,000 windshield wiper sweeps of continuous protection. This resilient shield drastically improves safety margins by maximizing night-driving visibility, preventing hard water spots, and delaying winter ice formation for effortless morning defrosting.

Why Detailers & Drivers Choose GlasShield Liquid

• 80,000 Wiper Sweep Longevity: High-density crosslinking allows the coating to relentlessly resist constant windshield wiper abrasion, road grit, and harsh alcohol-based washer fluids.

• Surgical High-Speed Rain Sheeting: Water and heavy slush slide off the glass rapidly at speeds as low as 30–35 mph, dramatically reducing your reliance on wiper blades and increasing foul-weather reaction times.

• All-Season Environmental Defense: Actively keeps road film, baked-on summer insects, and bird droppings from bonding, while ensuring winter ice and frost scrape off with minimal effort.

• Maximum Professional Economy: The high-yield 50mL spray bottle features a precise spray delivery, allowing multiple vehicles or large fleet structures to be coated from a single bottle.

• Zero-Glare, Optically Pure Finish: Completely transparent shield that eliminates wiper skipping, chatter, or distracting night-driving glare.

Application Surfaces & Material Guide

Glass Shield is strictly formulated for dense, silica-based exterior glass structures:

Step-by-Step Professional Installation Protocol

To guarantee an optically pure bond and prevent hazing, follow this precise spraying and immediate cotton-buffing workflow used in our Lake Forest facility:

Phase 1: Deep Glass Preparation

1. Dial In the Climate: Work indoors or in a fully shaded bay out of direct sunlight on a cool surface. For optimal crosslinking, apply when ambient temperatures are between 41°F and 86°F (5°C–30°C) with roughly 50% relative humidity.

2. Decontaminate: Meticulously wash and dry the exterior glass. Ensure the surface is 100% free of dust, dirt, hard water spots, or tree sap.

3. The Panel Wipe: Wipe down all glass sections thoroughly using Nasiol Clean to strip away residual oils and invisible road grime. Dry with a lint-free microfiber cloth.

Phase 2: Coating Deployment

1. Setup: Put on the included nitrile gloves and attach the mini trigger sprayer to the Glass Shield bottle.

2. Targeted Sectioning: Work in manageable 3ft by 3ft grids at a time.

3. Spray Distribution: Mist the product evenly across the grid section approximately 20 times to achieve the professional consumption rate of 5mL per square meter.

4. Immediate Cotton Buff:

   ⚠️ Critical Application Rule: Immediately buff the sprayed section using the included Nasiol Cotton Cloth in linear movements until all traces of product haze completely disappear. Do not use a microfiber cloth for the initial application pass, as it will prematurely absorb the raw nano-polymers.

5. Accidental Overspray: If you accidentally mist product onto paint, rubber trim, or plastic cowls, wipe it away immediately with a microfiber towel before it cures.

Phase 3: Post-Coating Cure & Sprayer Maintenance

• The 24-Hour Cure: Keep the freshly coated glass completely isolated from direct sunlight, moisture, dust, rain, and contamination for a full 24-hour curing window to unlock maximum longevity.

• Sprayer Maintenance Pro-Tip: After completing the application, turn the bottle completely upside down and pump the mini trigger until the internal straw and sprayer mechanism are entirely empty. This prevents cured product from clogging the nozzle for future use.

Complete Box Content Inventory

• 1x Nasiol GlasShield Ceramic Glass Coating (50mL Bottle)

• 1x Premium Nasiol Cotton Application Cloth

• 1x Precision Mini Trigger Sprayer

• 1x Pair of Nitrile Protective Gloves

• 1x Nasiol Authenticity Sticker

Product Specifications

• Volume: 50mL

• Durability Rating: Up to 2 Years / 80,000 Windshield Wiper Sweeps

• Core Benefit: High-Speed Rain, Snow, and Frost Repellency

• Consumption Rate: 5mL per m²

• Application Window: Exterior Automotive Glass Only